秋霞在线高清观看视频

    1. <big id="xpipm"><nobr id="xpipm"><track id="xpipm"></track></nobr></big>
      <code id="xpipm"><nobr id="xpipm"><track id="xpipm"></track></nobr></code>
      
      
    2. <strike id="xpipm"><sup id="xpipm"></sup></strike>
      Scott Machinery Letterhead

      MEP Shark 282 SXI evo Semi Automatic Bandsaw, Double Mitre

      Shark 282 SXI evo, semi-automatic electro-hydraulic band sawing machine, for cutting from 45潞 right to 60潞 left.
      鈥?Machine with controlled single axis microprocessor with the latest generation of controllers for semi-automatic sawing machines designed by MEP.
      鈥?Semi-automatic cycle: Starting the cycle: 鈥?the vice closes and the motor starts 鈥?the head goes down to execute cut 鈥?motor stops 鈥?head returns to top position and vice opens.
      鈥?Semi-automatic dynamic cycle: lowering the head manually, so as to position it just above the material, the semi-automatic cycle starts by pressing trigger switch on handle.

      Features
      鈥?Console with all centralized controls, installed on an articulated arm.
      鈥?Low voltage soft keyboard, in polyester, with thermo-shaped buttons, with tactile feeling and sound signal when operating.
      鈥?Display for the following messages: 鈥?Diagnostic 鈥?Alarms (cause description). 鈥?Input and output status. 鈥?Cut counting. 鈥?Time spent for the cut made. 鈥?Blade motor absorption. 鈥?Blade tension. 鈥?Blade speed. 鈥?Numeric displaying of the head position.
      鈥?Control handle of the manual cycle at 24 V, IP55.
      鈥?Program with several special cutting cycles.
      鈥?Latest generation hydraulic control unit, with high efficiency and low energy consumption.
      鈥?Wide working surface with rotating table installed on a roller bearing, dia. 265 mm, pre-loaded with thrust bearing.
      鈥?Double band rotation speed (36/72 m/min) with card PRESET to mount the electronic inverter for the continuous adjustment of the band speed (from 15 to 100 m/min).
      鈥?The limits of the head stroke are programmed through the control board, depending on the dimensions of the bars to be cut.
      鈥?Manually-operated blade tensioning through electronic transducer, with displaying.
      鈥?Steel base with removable coolant tray.
      鈥?Electric pump for band lubrication and cooling.
      鈥?Wire chip brush for band cleaning.
      鈥?Machine arranged for handling with movement equipment.
      鈥?Adjustable rod to measure stop to make cuts of the same length with millimetred steel rod.
      鈥?Stock support arm with roller predisposed to mount loading table.
      • Quality Italian Manufacturing
      • Optional
      • Loading tables
      • Unloading tables

      Specifications

      MEP Shark 282 SXI evo
      Capacity Straight +45擄 +60擄 -45擄
      Round 250mm 230mm 120mm 200mm
      Square 220mm 200mm 80mm 170mm
      Rectangular 280 x 220mm 220 x 200mm 140 x 80mm 200 x 140mm
      Blade size 2950 x 27 x 0.9mm
      Blade speed 36/72m/min
      Motor power 1.5/1.8kW 415V 3 Ph
      Floor size 1150 x 1970mm
      Weight 475kg
      Shipping 2.8m3 500kg
      Details are not binding All prices exclude GST.
      0800 215 215