Filtermist Afterfilters
Afterfilters are designed for the removal of oil smoke and any submicron particles that have passed through the Filtermist oil mist collector unit. The afterfilters are retrofitted to the Filtermist unit and fit easily over the exhaust end of the unit using clips to hold it in place.
The afterfilter is a media type filter cartridge creating a physical barrier through which the air must pass. The filters' life depends on the application and any application producing smoke or very fine oil particles should be fitted with an afterfilter.
The filters are constructed of filter media formed into continuous pleats, injection moulded end cap at the top and a fully moulded base with integrally moulded hooks. The pleated media is then supported by aluminium mesh on the outside. There is a foam seal around the base to ensure the air flow passes through the media filter. This construction makes it very light and robust.
The afterfilter is a media type filter cartridge creating a physical barrier through which the air must pass. The filters' life depends on the application and any application producing smoke or very fine oil particles should be fitted with an afterfilter.
The filters are constructed of filter media formed into continuous pleats, injection moulded end cap at the top and a fully moulded base with integrally moulded hooks. The pleated media is then supported by aluminium mesh on the outside. There is a foam seal around the base to ensure the air flow passes through the media filter. This construction makes it very light and robust.
- Easy Installation
- Afterfilter simply slides over the Filtermist motor and is secured in place with two toggle clips.
- High Efficiency
- Adding a standard afterfilter to a Filtermist unit will greatly increase efficiency in the sub-micron range.
- Noise Reduction
- An afterfilter reduces the noise level of a Filtermist unit by approximately 3 dB.
- Long Life
- Afterfilters have extended service lives due to their large surface area. They also last longer because the centrifugal impaction process of the Filtermist removes most of the pollutants before they ever reach the filter. Systems that rely entirely on media filters for the filtering process tend to have much shorter service lives.
- Full Range
- Standard afterfilters are available for all size Filtermist units.
Specifications
| Model | Compatability |
| Afterfilter S200 | S200 |
| Afterfilter (F8 Small) | S400, S800 |
| Afterfilter (F8 Medium) | FX4002, FX5002 |
| Afterfilter (F8 Large) | FX6002, FX7002 |
Details are not binding
All prices exclude GST.